
Changya New Material Technology Co., Ltd. was founded in 2013, and the group is headquartered in Ningbo, China. It is a limited liability company integrating R&D, production and sales. As China Disposable PET Cups & Lids Manufacturers and Printed PET Cups & Lids Suppliers, the company mainly produces paper PLA & Plastic disposable tableware, such as straw, cutlery, microwaveable box, hinged box, cup, carry out bag, plate, dinning kit, etc.
Changya New Material Technology Co., Ltd. has developed rapidly since its establishment, with a growth rate of over 30% each year, and has now become an enterprise in the field of high-quality disposable food and kitchen supplies in China. Changya products are mainly sold in the international market, and more than 90% of the products are exported to many regions such as Europe, the United States, and Australia. Changya adopts strict quality control standards for its products and has won a variety of international certifications, including BRC, GMP NSF, ISO 22000, and GMP, and it has passed LFGB, FDA, and other food safety tests. At the same time, it is a member of the international human rights organizations BSCI and Sedex. It has wide recognition and a good reputation in the international market.






The Material Shortlist: Six Options Behind Most Takeout Cutlery Orders Start wi...
View MoreA paddy fiber fork leaves the mold at around 60 °C, still soft enough to flex a...
View MorePaper vs plastic straws: serving time and cost per cup decide the winner, not t...
View MoreFor a 95°C curry with a 20-minute delivery window, bagasse is the safer default...
View MoreThe Short Answer: Biodegradable Is Broad, Compostable Is Specific Every compost...
View MoreOak, ash, pine, cedar, yew, and alder are the woods that should never be used f...
View MoreChangya New Material Technology Co., Ltd. manufactures clear PET cold beverage cups and matching lids at our Ningbo and Vietnam production bases. The range covers φ90, φ92, φ98 and φ107 cup formats with flat or dome lids, supplied plain or custom printed for juice bars, coffee chains, cinemas, catering and convenience retail. As a PET Cups & Lids manufacturer, we build the cup, lid and print specification as one package so the finished set performs on your filling line and on the shelf.
PET is our cold-drink material. It gives the cup a crystal-clear wall that keeps iced coffee, bubble tea, smoothies and soft drinks visible, which is why the range is used where the drink itself is part of the sale. We mould cups and lids as a matched set rather than selling them as separate commodity items.
| Product | Format | Typical Application |
|---|---|---|
| φ90 PET Cold Beverage Cup | 90 mm rim, clear body | Iced coffee, cold brew, small smoothies |
| φ92 PET Cold Beverage Cup | 92 mm rim, clear body | Bubble tea, fruit tea, dessert drinks |
| φ98 PET Cold Beverage Cup | 98 mm rim, clear body | Large iced drinks, milkshakes, frozen beverages |
| φ107 PET Clear Cold Beverage Cup | 107 mm rim, clear body | Sharing cups, cinema drinks, event catering |
| Flat Lid with Straw Slot | Clear plastic, straw opening | Takeaway cold drinks, delivery orders |
| Dome Lid with Straw Slot | Clear PET, raised profile | Whipped toppings, boba, layered drinks |
Cups and lids are produced in the same rim families so a single lid stock covers the matching cup diameter. Where a project needs a different drink volume, we work from the rim diameter and cup height rather than from a nominal ounce figure, because fill height and headspace determine the usable capacity in service.
PET sits alongside our other cup families, and the choice between them follows the drink, not the price list. Our Cups range also includes PP and PS formats for hot or opaque service, portion cups for condiments and sides, and paper cups for hot beverages.
Because we also produce Straws, a PET cup programme can be shipped with the straw diameter that matches the lid slot, avoiding the common mismatch between a wide boba straw and a narrow lid opening.
Cups are moulded in PET for cold service. The material is food-contact grade and is supported by our food safety testing programme, including FDA and LFGB testing referenced in our certification set. We do not position PET as a hot-fill or microwave material, and we confirm the intended temperature window before a print or wall specification is fixed.
A cup that stacks poorly or a lid that needs force to seat will slow a filling line more than any material saving is worth. We treat rim geometry, stack height and lid interference as the working specification, and we confirm them against your filling and lidding method.
Changya operates under ISO 22000, HACCP, BRC and GMP food safety and quality systems, with NSF registration and BSCI and Sedex membership. PET cups and lids are produced within that framework, and inspection records are kept against the agreed specification for each order.
| Checkpoint | What We Confirm |
|---|---|
| Rim and diameter | Cup rim matches the nominated lid family; measured against the approved sample. |
| Lid fit | Seating force and retention checked on the production cup, not a laboratory blank. |
| Colour and registration compared with the signed-off proof. | |
| Food contact | Test reports and declarations issued for the destination market. |
| Packing | Carton count, stack height and pallet pattern verified before dispatch. |
Custom work on this range centres on print, cup format and packing. We produce plain cups for distributors who stock a neutral line, and printed cups for operators who need brand artwork on the body. Lid choice follows the drink: flat lids for standard takeaway, dome lids where toppings need headspace.
A workable PET cup proposal needs the drink, the fill method and the market. We use the following inputs to select the format, lid and packing, and to prepare the quotation.
Cups and lids are produced at our Ningbo base and at our Vietnam production site, which gives the group capacity to support programmes across Europe, the United States and Australia. Shipment documentation, food contact declarations and packing lists are issued with each order, and approved samples are held as the reference for repeat production.
For stockists, we keep the specification stable between runs so shelf stock and customer expectations stay aligned. For operators, we align the cup and lid with the straw and cutlery items in the same order, which simplifies receiving and reduces the number of suppliers on a single beverage programme.
No. Our PET cups are specified for cold and iced beverages. For hot service we recommend paper or PP cups from our Cups range, and we confirm the fill temperature before recommending a material.
Lids are matched to the cup rim family: φ90, φ92, φ98 and φ107. Flat and dome lids are produced for the corresponding rim, and we confirm the pairing on the approved sample before production.
Yes. We produce custom printed PET cups from supplied artwork, with a proof approved before the run. Plain cups are also available for distributors who stock a neutral line.
Our quality systems include ISO 22000, HACCP, BRC and GMP, with NSF registration, and our products are tested to FDA and LFGB requirements. Documentation is issued against the destination market for each order.
Yes. We produce straws in PLA, paper and plastic formats, and we match the straw diameter to the lid slot so the set works together in service.
The drink type and fill temperature, target volume, preferred rim diameter, lid type, print artwork, filling method, packing preference and destination market. With those inputs we can select the format and prepare a quotation.