Changya New Material Technology Co., Ltd. was founded in 2013, and the group is headquartered in Ningbo, China. It is a limited liability company integrating R&D, production and sales. As China Disposable Wooden Cutlery Manufacturers and Printed Wooden Cutlery Suppliers, the company mainly produces paper PLA & Plastic disposable tableware, such as straw, cutlery, microwaveable box, hinged box, cup, carry out bag, plate, dinning kit, etc.
Changya New Material Technology Co., Ltd. has developed rapidly since its establishment, with a growth rate of over 30% each year, and has now become an enterprise in the field of high-quality disposable food and kitchen supplies in China. Changya products are mainly sold in the international market, and more than 90% of the products are exported to many regions such as Europe, the United States, and Australia. Changya adopts strict quality control standards for its products and has won a variety of international certifications, including BRC, GMP NSF, ISO 22000, and GMP, and it has passed LFGB, FDA, and other food safety tests. At the same time, it is a member of the international human rights organizations BSCI and Sedex. It has wide recognition and a good reputation in the international market.
Paper vs plastic straws: serving time and cost per cup decide the winner, not t...
View MoreFor a 95°C curry with a 20-minute delivery window, bagasse is the safer default...
View MoreThe Short Answer: Biodegradable Is Broad, Compostable Is Specific Every compost...
View MoreOak, ash, pine, cedar, yew, and alder are the woods that should never be used f...
View MoreThe Short Answer: Birch, Beech, and Hard Maple Birch, beech, and hard maple are...
View MoreSwitching to wooden cutlery sounds like a simple sustainability win. But after ...
View MoreChangya New Material Technology Co., Ltd. manufactures disposable wooden cutlery as part of a broad foodservice disposables range produced in Ningbo, China and at our Vietnam production base. Our Wooden Cutlery range covers birch cutlery sets, spoon-and-fork combinations and wooden stirrers for restaurants, delivery operators, caterers and retail distributors.
We produce these items alongside Cutlery in PLA, PP, PS and paddy fiber, so a single project can combine wooden utensils with matching straws, cups, containers and plates under one specification and one shipment.
Our wooden cutlery line is built around birch, a tight-grained hardwood that holds a clean edge and resists splintering in normal foodservice use. The range is configured as complete sets or as individual pieces, packed for bulk foodservice or retail-facing presentation.
A complete disposable set in birch, suited to takeaway meals, catering packs and event service where a natural utensil finish is preferred.
Fork, knife and spoon packed as a three-piece unit for delivery orders, airline and institutional meal service.
A spoon-led configuration for dessert, soup and soft-food menus where a second spoon replaces the knife.
Wooden stirrers for coffee, tea and beverage service, packed for cafés, hotels and vending applications.
Wooden cutlery suits menus where the utensil is visible to the diner and where a renewable material supports the brand story. It handles hot and cold dishes without the deformation risk associated with some plastic utensils, and the natural surface reads well in salad, grain bowl, dessert and coffee service.
The working point for a wooden cutlery specification is the food contact condition: dish temperature, moisture level, food density and expected utensil load. Birch gives a good balance of hardness and machinability, and we confirm the grade and finish against the intended use before quoting.
| Specification Area | What We Confirm | Typical Options |
|---|---|---|
| Wood species and grade | Birch grade, grain direction and surface sanding | Natural birch, smooth sanded finish |
| Set composition | Piece count and utensil mix per pack | Fork/knife/spoon, two-spoon set, stirrer set |
| Dimensions and thickness | Length, width and handle thickness against load | Standard foodservice lengths, heavier handles for dense foods |
| Printing and branding | Print area, ink suitability and artwork placement | Custom printed handles or wrap |
| Pack format | Bulk carton, wrapped set or retail pack | Poly bag, paper wrap, printed sleeve |
Our production is managed under food safety systems that include ISO 22000, HACCP, BRC, GMP and NSF, with product testing against FDA and LFGB requirements. FSC certification supports the traceability of wood-based material, and our BSCI and Sedex membership reflects the social compliance side of the supply relationship.
For wooden cutlery, the checks that matter in acceptance are surface finish, splinter-free edges, dimensional consistency across a carton, print registration and pack count. We agree the inspection basis with the customer before production so that the acceptance criteria match the intended market.
Custom printing is available on wooden cutlery handles and on the outer wrap or sleeve, which lets a distributor or chain carry its own mark through the set. We also configure the pack format around the customer's service model: bulk cartons for back-of-house dispensing, individual wrapped sets for delivery accuracy, or retail-ready packs for shelf sale.
Because wooden cutlery is often ordered together with other disposables, we coordinate the cutlery specification with Paper Straws and Paper Cups so that pack counts, print colours and carton markings stay consistent across the order.
Wooden cutlery needs no installation, but storage conditions affect performance. We recommend dry, ventilated storage away from direct sunlight and moisture, with cartons kept off the floor. In humid climates, sealed inner bags protect the wood between delivery and use.
A wooden cutlery proposal is prepared from the service conditions and the pack requirement, not from a catalogue number alone. The following inputs let us confirm the right set, finish and packing.
| Project Input | Why It Matters |
|---|---|
| Menu and food types | Determines utensil shape, thickness and set composition |
| Service temperature and moisture | Guides finish and handling recommendations |
| Pack format and count | Sets carton quantity and inner packaging |
| Print artwork and colours | Confirms print area and ink suitability |
| Destination market and compliance needs | Aligns testing and documentation with import requirements |
| Order volume and delivery schedule | Supports production planning across Ningbo and Vietnam |
Our wooden cutlery is made from birch, a hardwood chosen for its tight grain, hardness and clean machining. Birch holds a smooth food-contact surface and resists splintering under normal use.
Yes. We print on wooden handles and on outer wraps or sleeves. We confirm the print area and artwork placement against the selected set before production.
Our food safety systems include ISO 22000, HACCP, BRC, GMP and NSF, with FDA and LFGB product testing. FSC certification supports wood traceability, and we are a BSCI and Sedex member.
We pack in bulk cartons, individually wrapped sets or retail-ready sleeves, depending on the service model. Inner bags protect the wood during transport and storage in humid conditions.
Yes. We coordinate wooden cutlery with our straws, cups, containers and plates so that pack counts, print colours and carton markings stay consistent across a mixed order.
PLA straws have significant advantages in raw material selection, which stems from their u...
The biodegradability of PLA straws is one of its significant advantages in the field of en...
Copyright © Changya New Material Technology Co., Ltd.All Rights Reserved.
Custom Disposable Printed Wooden Cutlery Manufacturers
English
中文简体
